Dual esp32 s3 devkit based kmbox implementation

ESP32-S3 development board with JTAG/USB-OTG and LiPo charger

A minimal ESP32-S3 dev kit that is compatible with usual breadboard, featuring dual USB Type-C ports and exposing all available GPIO pins.

Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bus-Pirate firmware.

No description available

This repository contains a simple test program to jump-start development on the ESP32-S3-DEVKITC-1-N32R8V board, which features an ESP32-S3 WROOM-2 module with 32 MB Octal Flash and 8 MB Octal RAM.

ESP32-S3-USB-OTG devkit playground

No description available

VEE Port for Espressif ESP32-S3-DevKitC-1-N8R8 development board.

A smart thermostat using the ESP32 S3 Devkit to replace an outdated two-wire heat-only thermostat.

Coding of an ESP32-S3-WROOM2-DevKit for receiving frequency of two electrodes plates, which helps measuring the level of filling on a propellant tank.

ESP32-S3-DevKitC with ESP32-S3-WROOM-N8

ESP32-S3-DevKitC V1.1 PCB Design using Altium Designer

A PCB to connect up to 5 PN532 NFC reader modules to an ESP32 S3 WROOM devkit board

ESP32-S3 DevKIT Made using the Espressif Schematics, Needs more changes and improvements , donot hesitate to make changes and suggest improvements. Final Plan is to implemnt a global datalogger

No description available

VGA ESP32-S3 Breakout board for WROOM1- DevKit

No description available

LambLisp for the Espressif ESP32 dev kit

No description available

I have designed an esp32-s3-devkitM-1 PCB in Altium Designer. Its a four layer PCB where i use ESP32-S3-MINI-1 as main microcontroller. Here, I use 2 USB type-c port , one FTDI Chip for serial communication, one voltage regulator, push button for resetting and booting, one user led , TVS diode and some power led and some resistor and capacitor .

This program provides detailed information about the ESP32-S3 chip and tests its RAM and flash memory capacities. It's designed to help developers understand the characteristics of their ESP32-S3 module and verify its memory capabilities.

No description available

AuraLink – Smart IoT Medicine Cabinet System AuraLink is an intelligent IoT-powered medicine cabinet designed to ensure safe pharmaceutical storage by maintaining optimal temperature, humidity, and air quality conditions. Built with the ESP32-S3 (OLIMEX DevKit-Lipo) and a suite of advanced sensors (BME280, MQ135, DHT22, LDR/BH1750, PIR), the syste

No description available

Control the built-in RGB LED of your ESP32-S3 DevKit over Wi-Fi using a self-hosted web interface.

Hello world on ESP32-S3 devkit

Tryouts of this board for a project

3 Phase PWM

No description available