A Test and Debug Tool for BMC AHB Interfaces

Hive streaming ingest test application

A simple, practical introduction to culvert hydraulics, flow types, and design fundamentals with HY-8 examples.

Channel for easy streaming or work between complex logics.

The latest version of SUNTANS model with vegetation, sediment transport, subgrid, culvert and hybrid vertical coordinate.

Updated Cornell Culvert Model with a fix for peak flow estimation

A project aiming to improve the use of cost models in culvert improvement planning for salmon fish passage.

No description available

Packet Analysis code for Pike

FLUXOS-OVERLAND solved the 2D shallow water PDEs that accounts for inertial (local and convective), pressure, gravity and friction forces (momentum balance). The model can capture backwater effects (unlike the kinematic or diffusion waves). This is critical to simulate low-relief terrains. The model was originally developed for river reach flood simulations, and therefore it was repurposed here to allow for field and catchment-scale simulations and snowmelt forcing. The topography (DEM) is used to capture snowmelt runoff pathways (there is no need to specify the location of the streams). This is important in regions with variable contributing areas such as the Canadian Prairies A module for drop inlet spillways and culverts was added. It is based on Bernoulli’s Equation (assumes pressure dominated at this stage) and head losses computed from the implicit Colebrook-White equation for both laminar and turbulent pipe flows, which is solved interactively using the Raphson-Newton interaction method. Vegetation and other obstacles to the flow are included through distributed absolute roughness heights.

The source code and sample data used in the article "Automatic determination of stream networks from DEMs by using road network data to locate culverts".

Bridges and culverts mapping using ALS point clouds and Road centerline information.

A tool to evaluate culvert health using InSAR datasets.

All the files needed to run the Cornell Culvert Model - Updated from previous CulvertStartKit and CulvertEvaluation repositories

No description available

Detect road culverts with airborne laser scanning and deep learning

7寸涵道穿越机cad图纸，建议使用60A以上电调，2806系列以上电机，挂载能力在2kg左右，涵道圈运用流体力学设计，图纸内含海绵圈的切割尺寸7-inch ducted Fan Unmanned Aerial Vehicle cad drawings, it is recommended to use more than 60A ESC, 2806 series motor or more, the load capacity in about 2kg, culvert circle using hydrodynamic design, the drawing contains the cutting size of the sponge circle

Traffic signals are used to control the flow of vehicles. In the recent years, the need of transportation has gain immense importance for logistics as well as for common human. This has given rise to the number of vehicles on the road. Due to this reason, traffic jams and road accidents are a common sight in any busy city. Traffic Signals provide an easy, cheap, automatic and justified solution to the road points where the vehicles may turn to other directions e.g. roundabouts, culverts, busy walk through etc. The project we have chosen is an 4-way traffic controller. The basic idea behind the design is to avoid the collision of vehicles by providing appropriate signals to different directions for a limited time slot, after which the next waiting drivers will be given same treatment. In this way a cycle will be established which will control the traffic. The control signals are 3-lights. Top light is Red(Stop), Middle light is Yellow(Wait) Bottom light is Green(Go). We used 89C51 microcontroller for this operation. In this project, we connect 4 7-seg LED display at port 2 of microcontroller and these are controlled by port 0. At port 0 we use pull up transistor. Port 1 & Port 3 of microcontroller are used for signal indication.

Secondary indexing for structured and unstructured data in Big Table style databases.

This is the current version of the Python scripts used to analyse flood risk for stream crossings based on data collected for culverts across NY state. To be used in conjunction with the CulvertStartKit repository.

GIS tools designed to support analysis of culvert performance within their watershed

Culvert delineation in the Deerfield watershed using the NHDHRDV2 hydrography layers.

The scripts update, sort and rank records based on input culvert parameters in a Microsoft Excel spreadsheet.

Culvert Design Script

No description available

Culvert is a software for calculating road water bridges

MicroMouse Source Code 2017

A program designed for the MMORPG Maplestory, which uses Computer Vision to automate data tabulation for a system in the game

This repository is for post processing of culvert scour experiment

No description available