Open Source Hardware OSHW ESP32 development board designed with KiCAD to be pin to pin compatible with Espressif ESP32-DevKitC, but with additional LiPo charger and battery

Development board for ESP32-P4 Dual core RISCV processor from Espressif

No description available

ESP32-C3-DevKit-Lipo RISC-V development board with USB, JTAG, WIFI, BT5, LiPo battery charger

ESP32-S3 development board with JTAG/USB-OTG and LiPo charger

Apply to FNK0086

Minimal example code for running an Edge Impulse designed neural network on an ESP32 dev kit using platformio

ESP32-S2 development board with native USB-OTG, the hardware supports both USB host and USB device functionality, LiPo battery charger and step up for handheld battery operation

ESP32-S2 IoT developement board with WiFi, USB programmer, RGB LED, LiPo charger, GPIOs

Easy to use captive portal for esp32 S2 mini + USB Nugget dev kits

A minimal ESP32-S3 dev kit that is compatible with usual breadboard, featuring dual USB Type-C ports and exposing all available GPIO pins.

Custom KiCad Library for ESP32 DEV KIT

ESP32 and LAN8720 example code

A fixed version of ESP32 30 pins KiCAD symbol and footprint by BlackCoffee from the KiCAD forum

No description available

No description available

Development board for ESP32-H2 SOC with BLE5 Matter, Thread, Zigbee

ESP32-C6 WiFi6, Bluetooth 5 LE, Zigbee, Thread, Matter development board with LiPo battery

No description available

Open hardware CM_ESP_P4_C5 dev kit using Espressif ESP32-P4 SOM and ESP32-C5 module. Standard Camemake camera module pinout for vision, HMI and edge control. Full schematics, PCB, firmware, BOM and mechanical so you can build and ship your own product.

A small, USB-powered, devkit implementing the ESP32 Pico V3

Enhanced fork of sample website to drive 13.3" Spectra 6 displays via Good Display's ESP32-133C02 dev kit (Wifi firmware)

The source for MaESP ESP32 Dev Kit

ESP32 Development Board (Wifi, Bluetooth, LoRa, GSM-GPRS SIM800, SDIO-MMC, MP3 Decode VS1053, OLED, WS2812, USB-UART CP2102, IO Button.

No description available

VEE Port for Espressif ESP32-S3-DevKitC-1-N8R8 development board.

making some led blink on an esp32-c3 risc-v dev-kit, bare metal assembly

Waveshare ESP32-P4-Module-DEV-KIT Development Board Compatible with a 2.1-inch circular screen (480x480 resolution) via DSI interface, paired with ST7701S driver chip. It also integrates FT3236/FT6X36 I2C touch driver for precise touch interaction.

ESP32-S3-DevKitC with ESP32-S3-WROOM-N8

ESP32-S3-DevKitC V1.1 PCB Design using Altium Designer