DOIT ESP32 DEVKIT V1

Open Source Hardware OSHW ESP32 development board designed with KiCAD to be pin to pin compatible with Espressif ESP32-DevKitC, but with additional LiPo charger and battery

Breadboard friendly, USB Type C enabled, ESP32 Devkit compatible, JLCPCB assembly ready ESP32 devboard

基于ESP32的Hub75/Hub75E开发板

Dual esp32 s3 devkit based kmbox implementation

Development board for ESP32-P4 Dual core RISCV processor from Espressif

No description available

Unofficial Development Kit for Espressif ESP32

ESP32-C3-DevKit-Lipo RISC-V development board with USB, JTAG, WIFI, BT5, LiPo battery charger

ESP32-DEVKITV1 EAGLE-FOOTPRINT

ESP32-S3 development board with JTAG/USB-OTG and LiPo charger

Code for OpenController ESP32 Devkit

This repository contains a library of the ESP32 DEVKIT for Proteus. It includes: Package for PCB: Detailed components for designing printed circuit boards. Schematic diagram: Elements for creating clear electrical schematics. 3D visualization: 3D models of the ESP32 DEVKIT (3D design by Gerry Stenz). Note: No connection to Arduino IDE and Proteus.

DOIT Esp32 DevKit v1 KiCad component file and footprint.

Espressif ESP32-C3 DevKit M1 Driving a WS2812B-61 Led Strip.

Hub75 Adapter for ESP32 DevKit V4

ESP32-S2 development board with native USB-OTG, the hardware supports both USB host and USB device functionality, LiPo battery charger and step up for handheld battery operation

Simple project for live audio streaming and recording from an I2S MEMS microphone (INMP441) over UDP, using an ESP32 DevKit C V2. The ESP32 reads audio samples from the microphone via I2S and transmits them as raw UDP packets to a listener PC on the local network.

ESP32-S2 IoT developement board with WiFi, USB programmer, RGB LED, LiPo charger, GPIOs

Swadge devkit for an ESP32-S2 with all the bells and whistles

Example ESPHome configs for ESP32 DevKits

Demonstrating interfacing with the peripherals on this board, including the LED, IMU, and BLE.

An adapter for DoIt ESP32 DevKit to fit into NodeMCU's V1.0 DIP socket

Use a 2.7 waveshare eink screen with micropython

A minimal ESP32-S3 dev kit that is compatible with usual breadboard, featuring dual USB Type-C ports and exposing all available GPIO pins.

Custom KiCad Library for ESP32 DEV KIT

ESP32 DevKit v1 home sensor (bme280, scd30, sds011) with InfluxDB, Telegraf and Mosquitto using MQTT over TLS and over-the-air firmware upgrade (OTA)

An IOT based mobile application to monitor the vitals such as ECG, Body Temperature, Blood Pressure using an ESP32 DevKit and React Native.

A fixed version of ESP32 30 pins KiCAD symbol and footprint by BlackCoffee from the KiCAD forum

ESP32 and LAN8720 example code